Touch AIO FAQ And Shootings

Beijing time, Dec. 16 news, China touch screen network news, touch query machine common problems and solutions. Touch the inquiry machine, presumably everyone has touched it. Friends who have used the touch query machine may have encountered such problems. If they want to query but search all the time, sometimes they even get stuck and have no response. So, what's the reason? Let's talk about the common problems and solutions of touch query machine.


This article is from: http://www.51touch.com/touchscreen/news/dynamic/201912/16-55874.html


Common problems and solutions of touch inquiry machine


I. why is the touch screen of the touch inquiry machine inaccurate?


1. It may be that after a period of use, the reflective stripes around the touch screen are covered with dust. Please wipe with a dry soft cloth, restart the computer after power failure and recalibrate.


2. It may be that the reflective stripes of touch high brightness LCD screen are slightly damaged and cannot be completely repaired.


2. Why does the touch inquiry machine not respond to touch?


1. It is possible that the high brightness LCD touch screen integrated machine connected by one of the lines is not connected, please check the connection.


2. The touch screen driver of the touch query machine may not have the serial port number corresponding to the actual installation of the touch screen, please reinstall the driver.


When you use the touch query machine to solve this problem through the above methods, please do not dismantle the touch query machine, and contact the touch query mechanism manufacturer or expert to avoid greater damage to the machine.


3. The remote control cannot be operated.


Check whether the outdoor remote control protrudes to contact the integrated machine with battery, whether the remote control is aimed at the remote control sensor, and whether the connection between the remote control sensor and the drive board is loose. If there is no above problem, it may be because the remote control sensor is damaged or the drive board is damaged.


4. LCD screen is black without display


Please check whether the touch inquiry machine is powered on and whether the internal power indicator is on.