Introduction to Coating Machine
Coating machine is to pre-point a special glue on the PCB board where it needs to be patched, and then pass through the oven after curing. Coating is carried out automatically according to the program. The coating machine is mainly used for the three anti-paints in the product process, UV glue and other liquids are sprayed, coated, and dripped to the precise position of each product. It can be used to draw lines, circles or arcs.
Application range of coating machine
Three-proof coating on PCBA surface, dam process, solder mask coating, DIP component reinforcement, etc.
Product features of coating machine
1. It adopts integral cast iron frame and gantry platform to improve the stability of operation; adopts linear module to carry the motion platform with an operation accuracy of 0.02mm; high-speed and efficient system to achieve higher productivity.
2. Using industrial computer + motion control card, WINDOWS7 operating system, fault sound and light alarm and menu display.
3. There are four programming modes "offline picture" and "offline vision" for "online teaching and online vision requirements", which can meet various requirements.
4. Equipped with a multi-functional rubber valve, which can be tilted 35° in all directions, and can be matched with different models of rubber valves according to production needs to achieve various production needs.
5. Brand new track conveyor system, special aluminum alloy track and stainless steel conveyor chain, the width adjustment components basically do not need maintenance; the track width can be set according to the program or MES system and automatically adjusted in place, the control is more precise and optional.
6. Equipped with glue automatic cleaning device, SMEMA interface can communicate with other equipment, independent paint container barrel, bottom exhaust function, top air exhaust port.
7. Standard functional glue automatic cleaning device, pressure control platen device during coating, waste liquid recovery, three-color signal light, standard chain transmission, visual glass window, access control lock.
Industrial computer features:
CPU: Intel® J1900 Processor, 2.0GHz
Cooling system: fanless system
Memory: 2GB/4GB DDR3
Storage: mSATA SSD
USB interface: 3 USB2.0+1 USB3.0, maximum 6 USB (5 USB2.0 + 1 USB3.0)
Serial port: 2 RS232 interfaces
Dual display: HDMI + VGA
Audio: headset and microphone
Wireless network card: wireless network
Ethernet network: 2 10/100/1000Mbps Ethernet
Input voltage: 12V DC (aviation connector), optional 9V-36V DC
System technology: Microsoft system Windows 7/ Windows 8/ Windows 10/ Linux
Working temperature: -10℃-60℃ (14-140℉) (extended temperature optional)
Storage temperature: -20℃-75℃ (-4-167℉) (extended temperature optional)
Color: black and silver gray
Material: high-strength aluminum alloy front panel, rear cover fanless aluminum alloy radiator
Customer-oriented customization: support custom BIOS, system encryption, custom LOGO
The industrial computer is the brain of the coating machine, and it is especially important to choose a high-quality supplier with a high cost performance. Anrecson has been focusing on the industrial control industry for 20 years and has a wealth of experience in the development and production of industrial control computers. We also have many industrial control machines with different performances to meet different customer needs. If you need an industrial control machine for the coating machine, you can directly contact our customer service staff.
