1, To maintain the digital signage using the humidity of the environment, do not let anything with moisture properties into your digital signage.
The addition of electricity to digital signage containing moisture can lead to corrosion of digital signage parts, which in turn causes permanent damage.
2, To avoid possible problems, we can choose passive protection and active protection, as far as possible to cause damage to the logarithmic word signs away from the screen, while cleaning the screen is also as gently as possible to wipe, to minimize the possibility of injury.
3, Digital signage and our users have the most close relationship, do a good job of cleaning and maintenance work is also very necessary. Long exposure to the outdoor environment wind blowing, sun, dust, etc., a period of time down, the screen must be a piece of dust, which needs to be cleaned in time to prevent dust for a long time to wrap the surface affect the viewing effect.
4, The power supply is required to be stable, and the grounding protection is good, in the harsh natural conditions, especially strong lightning weather do not use.
5, Screen body is strictly forbidden to water, iron powder and other easy to conductive metal objects. Digital signage as far as possible in a low-dust environment, a large amount of dust will affect the display effect, while too much dust will cause damage to the circuit.
If you enter the water for various reasons, power off immediately and contact the maintenance personnel until the screen body display plate is dry before you can use it.
6. Switching order of Digital signage:
A: Turn on the control computer to make it work properly before turning on the large screen of the digital signage.
B: Turn off the digital signage screen before shutting down the computer.
7, Play not for a long time in the full white, all-red, all green, all blue and other full bright screen, so as not to cause excessive current, power cord heating too large, LED lamp damage, affecting the service life of the display. Do not disassemble or stitch the screen at will.
